Soap Renew

Collect rests of used soaps, regardless of the sort, use old domestic gadget and scrub all this.

Step 1: Mixing

Mix this to get uniformly mixture.

Step 2: Soaking

Use a form which is heat resistant.  Add water (not to much), just to soak mixture.

Step 3: Melting

Put this in oven:
Adjust temperature to max 100 C°. And let them to melt/heat, until bubbles arrive.  With metal stick you can stir and check if all is heated through. About 20-25 minutes total.

Put this in microwave:
Take a steps of 30 sec, constantly monitoring the  status, to reach bubbles pop out. With metal stick you can stir and check if all is heated through. About 5 steps....5 minutes total.

Step 4: Cooling

Put this outside, to cool dawn. Form future looks. Wait until is cold and pick it out.  Its ready to use.

Step 5: Forming

Or, until is still WARM - not HOT,  from with hands future appereance. 

Of course, you can experiment as you like! 

Sincerely yours,