Print PDF
Favorite
Email
Step 16Stuff the sock.
The circuit board and the speaker are going to be stuffed in the sock with the grommet.
The other speaker and the power supply will be stuffed in the other with the zipper.
Take about a fistful of stuffing. Position the speaker and the circuit board so that when stuffed the circuit board will be closer to the toe and the speaker closer to the middle of the sock.
When the sock is folded over, the stuffing should all be in the folded over part. Also, the speaker should be at the bottom of the fold and facing inward towards the ear.
With the other sock you should only insert the headbands, wiring and stuffing. You can attach the speaker and plug in the battery later after you shove in the stuffing through the zipper.
The other speaker and the power supply will be stuffed in the other with the zipper.
Take about a fistful of stuffing. Position the speaker and the circuit board so that when stuffed the circuit board will be closer to the toe and the speaker closer to the middle of the sock.
When the sock is folded over, the stuffing should all be in the folded over part. Also, the speaker should be at the bottom of the fold and facing inward towards the ear.
With the other sock you should only insert the headbands, wiring and stuffing. You can attach the speaker and plug in the battery later after you shove in the stuffing through the zipper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
