Print PDF
Favorite
Email
Step 2Assembly
Wash and dry the peroxide bottle and drink can thoroughly. Soak the label off the peroxide bottle. If needed, use a solvent like Goo Gone to get the adhesive off. Both containers should be completely dry and clean of any glue or residue.
With a sharp knife (X-Acto, etc.) pierce the peroxide bottle at the bottom of the top bulge. There are two bulged areas on the common H2O2 bottle, one around the bottom and one where the cone shaped top meets the cylindrical section. Cut off the cone part as neatly as possible.
With a sharp knife (X-Acto, etc.) pierce the peroxide bottle at the bottom of the top bulge. There are two bulged areas on the common H2O2 bottle, one around the bottom and one where the cone shaped top meets the cylindrical section. Cut off the cone part as neatly as possible.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
