Print PDF
Favorite
Email
Step 13Wiring the Circuit Board
This is the final step. Bring all the wires into the box, and wire them into their respective contacts.
If your board is especially messy, it might make sense to dab a little droplet of hot glue onto the soldered joints to keep the contacts from shorting out with each other, and potentially with the batteries as well, if your case is as cramped as mine is.
Coil up the wires, close the box up, and try switching things on.
Enjoy!
If your board is especially messy, it might make sense to dab a little droplet of hot glue onto the soldered joints to keep the contacts from shorting out with each other, and potentially with the batteries as well, if your case is as cramped as mine is.
Coil up the wires, close the box up, and try switching things on.
Enjoy!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
