Print PDF
Favorite
Email
Step 5Testing and Rewireing
In the below video you can see the robot accelerates when a light is shone on it, but spins in a circle because one of the motors was reversed.
If this happens to your robot all you have to do is re-solder the motor wires in reverse. So the one that used to be negative is now positive.
If this happens to your robot all you have to do is re-solder the motor wires in reverse. So the one that used to be negative is now positive.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
