Solar Rechargeable Battery Powered PSP Charger

Step 3 Assemble the parts

I used the hot glue gun to secure the solar cell in the lid. Before putting it in, I covered all contacts on the underside with electrical tape. Next, I put the battery holder in the tin. I also covered the exposed contacts on the holder with electrical tape first. All in all, it's a very tight fit, but once it's under the lip of the main tin body, it's nice and snug! The switch, LED/holder, and power cord should be assembled into place after everything is wired together.

Comments

[recordmasta001]

Hi one question. What is the voltage of the solar cell?

[Grand Cham]

This thing is the best!

[YoChuck]

Hey thanks! Glad you enjoyed it!