Print PDF
Favorite
Email
Step 3Add your lamp in place of exsisting LED
Using a soldering iron, de-solder the exsisting LED on the lamp and put it in your parts drawer/box/floor.
Be sure you have the polarity correct when you solder the leads of your lamp to the leads where the first LED used to be!
I covered the soldered connections in hot glue after I was done.
Be sure you have the polarity correct when you solder the leads of your lamp to the leads where the first LED used to be!
I covered the soldered connections in hot glue after I was done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
