Here's Marko welding a giant sports car rotisserie using the solar welder.
These panels charge the cart at about 3 amps. Welding or driving draws up to 150 amps, but only in short bursts.
To my surprise I have to disconnect the panel after a day or two to keep from overcharging the pack. I probably only charge one day a week. I better add an inverter so I can power my office and other tools from this thing.
This thing is so damn cool you'll smile too much and hurt your face.
I probably should have put the cover back over the batteries before he started welding, cuz batteries can make hydrogen which can go pop.
You're smart kids, you can figure out other safety warnings for this thing.
Step 1: The Panels
To my surprise most of the panels worked okay and the seagull poop cleaned off pretty well, althought the aluminum frames were pretty corroded.
These are 20 watt panels that produce an open-circuit voltage of about 18 volts. That's about right for a 12 volt battery, which is what they were made for. We wired up three of them to charge the 36 volt golf cart battery bank. Then I wired another three the same way to double the amperage. I tried them all in series, but it didn't work nearly as well. Only about half as many amps flowed.