Introduction: Solder Stand on a Second Hand.

Picture of Solder Stand on a Second Hand.

Having something to hold your soldering iron can be really helpful so check this out!

Step 1: Finding the Stuff You Need.

you will need some 1.57 mm thick copper wire and 1.00mm thick copper wire.and your soldering iron.

Step 2: Making the Stand

Wrap the 1.57mmthick wire around your entire soder iron then leave a little extra wire left (2 inches). Now wrap the inches left of wire around the second hand werever you whant. Then the 1.00 mm copperwire wrap around the stand and second hand nice and tight for a secure stand.


Penolopy Bulnick (author)2016-06-24

Looks handy :)

About This Instructable




Bio: The first time I started to get into this stuff was in may 2016 when I joined a robotics club at school
More by Bakerd1:solder stand on a second hand.
Add instructable to: