Solor Energy at Home

Published

Introduction: Solor Energy at Home

This solar panel I have bought from China. I welded it and also made wooden box․ At the both sides have puted glass.

Step 1: Make

This solar panel I have bought from China. I welded it and also made wooden box․ At the both sides have puted glass.

Step 2: Tools and Material

1.Solderin Iron

2.Flux pen

3.Silicone sealant

4. Screw

5․Wooden board

Step 3: Negative and Positive

front - negative

back side - positive

Step 4: Soldering Procces

Step 5: Both Sides Add Flux

add fluxe then soldering

Step 6: Weld in Front

Step 7: For Connecting Panel Use This Circuit

Step 8: Glass Size

2 x glass

size 51cm x 109cm

Step 9: Panel Construction

when you collect the circuit. Add silicon on the back side. place on the glass.

and at the end put the second glass on the panels․

Step 10: The Picture Is in Front and Back in Ready Condition

Step 11: Use Areas

This panel can be used

1․ to charge a 12v voltage battery

2․ Connect inventor and dc 12v to ac 220v and use your house

Share

    Recommendations

    • Casting Contest

      Casting Contest
    • Woodworking Contest

      Woodworking Contest
    • Planter Challenge

      Planter Challenge
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    2 Comments

    Cool. I have been thinking about setting up solar panels at my house. Thanks for sharing the tutorial.

    1 reply

    You are welcome. if you have any question, please let me know.