Introduction: Some Failed or Unposted Knex Guns.

Picture of Some Failed or Unposted Knex Guns.

Hello there. In this ible, I'll show some stuff I didn't post completely. I've put some internal photos from most guns with it (so if any interested person could probably build it). This ible will be made bigger when I decide not to post all my stuff in a seperate slideshow. 
I decided not to post these guns completely because:
1: they didn't shoot well;
2: they aren't realy ''innovative'';
3: some aren't modelled after a real gun, but still didn't shoot;
4: they didn't work well;
5: They are not to much different from already posted guns.

Step 1: The Bolt Action Model

Picture of The Bolt Action Model

It was a model. It featured:
- 'bolt action'
- removable magazine
- movin trigger
- comfortable

It wasn't based of any real gun. The bolt action worked smoothly. The mag's needed to be taken out manualy, they didn't drop after pushing the mag-release. I didn't post it because it didn't shoot, and it wasn't based of a real gun. 

Step 2: Bullpup Slingshot Gun

Picture of Bullpup Slingshot Gun

I don't know if the trigger mech was new. I just made it out of my head. 
Didn't post because it didn't shoot well. It was pretty comfortable to hold. You hold it like a M93r with the foregrip attached.
The trigger mech was basicly the mech of the sipriani rifle. It had some rods with hinges to push on it. The trigger slided straight back.

Step 3: The M4-ish Model

Picture of The M4-ish Model

Heavily based of the M4. The stock is too low, and the handguard to far forward though. That's why I didn't post it
It featured:
- Moving charging handles (when you pull the one on the back, the one on the right moves along with it)
- Removable magazines (with 'magpul')
- Movving trigger
- Comfortable
- Rail on top (same as on my PDR)
- Pretty good looks

The stock is based of the ''socom stock'' so that's why it might look a bit wierd.

Step 4: Other, Unnamed Shooting Gun

Picture of Other, Unnamed Shooting Gun

So I took the stock and main body of the M4-ish gun, and made it into this one.
Not posted 'cause of:
- Wierd looks
- Not innovative
- Fixed mag
- Didn't shoot too great

Step 5: Busmaster ACR

Picture of Busmaster ACR

ACR model. Looked pretty good, but I was not completely happy about it (stock-body part mainly). That's why it wasn't posted. It featured all my standard stuff.

Step 6: Lmg Model

Picture of Lmg Model
I made this LMG. It was very long (over a meter). It had a opening lid thingy, removable ammo belt, charging handle, trigger etc. and a nice tripod (well, nice is a big word. It allowed the gun to ascend/descend and turn while staying on it's spot). I give credit to The Dunkis for the rail part (it can accept standard rail airsoft sights)

Step 7: P90

Picture of P90
Built after Knexgunbuilder's P90. I took out the firing mech (I didn't want to melt my pin), changed the fron-top and stock. I put a moving trigger, charging handle and a removable magazine in it. Didn't post 'cause it wasn't to different from his one.

Step 8: M24-variant

Picture of M24-variant

Started out as Warhawk One's M24. Did not have bands, so I threw out the firing mech. I changed the handle (it was to big for my hands (tnotwss)). Features a standard pistol grip, comfortable stock, handguard. Different iron sight versions, scope, moving trigger, bolt etc. Looks pretty good, and is over a meter long.

Step 9: New G36C

Picture of New G36C

I've redone my old G36C. This one is slimmer, thus more realistic (old one was too fat). Features standard stuff, doesn't shoot.

Step 10: Saiga 12

Picture of Saiga 12

The first k'nex Saiga 12 model/replica on the site. It's certainly not as good as it could be. I wasn't completely happy with it, but it looked ok. It featured all standard stuff. The thing I perhaps liked the most about it were the iron sights. I like how they turned out. I didn't like the looks of the stock. But I've tried the skeletonized stock several times. All of them turned out looking terrible, or very flimsy. This one both looks decent, and is moderatly sturdy. It was very comfortable with the front grip attached

Step 11: Gun That Started As a M16, But Looked Way Off

Picture of Gun That Started As a M16, But Looked Way Off
This one started as the M16 ~KGB~ has in this topic (this gun), which was basicly a modded version of the M16 Vietnam Style. I wanted to make a rail system on the barrel, similiar to Knexgurl's (Blue Mullet's) HK417, but in the end, I only had enough to make side rails. This is also why the stock is completely different (same as on the HK417), and why it doesn't have a carrying handle. The reciever is also made after Knexgurl's M16, with some modded parts to fit 'mine'. So, it's basicly a crossover between different guns, with parts modded by me. It has a interesing (IMO) charging handle, which functions as a 'dual' one. But that is explained in the photos, and an upcoming video.
In the end, it doesn't look like an M16, it looks weird (with only the side rails) so I'll break it apart soon, and make something else.

Step 12: Glock

Picture of Glock

This was a request by Heydiddlediddle. He asked for a drop-free magazine Glock. So I made this. It has a sort of mag, that doesn't fall out, but IMO, is not too much looking like a Glock. It does look okay-ish for a pistol, just not really Glocky. The trigger moves, it has some sort of magazines, and it can accept different types of attachments.

Step 13: Another LMG

Picture of Another LMG
Another LMG, another non shooting one. A bit based this one, mostly the height of the body and the barrel style
The features it has:
- Decent ~ good looks IMO
- Very comfortable handle
- Moving trigger, charging handle and loading lid thing
- Good size
- Removable ammo belt
- A small mechanism like thing to keep the lid closed while holding the gun upside down, if you feel like holding a gun like that 

Didn't post it 'cause it's absolutely nothing new.

Step 14: Break Action Rifle

Picture of Break Action Rifle

I felt like making a break action gun, they always worked good for me. This one, however didn't. The handle / stock was flimsy, the hinge wasn't the sturdiest, and the pin will hit your hand. I never shot it, so I don't know how well it would work.
The handle was pretty comfortable, it had iron sights, The Racker's trigger, so the trigger would work good.

Step 15: Unfinished Thing

Picture of Unfinished Thing

Started this when I was bored one day. Found out loading would become difficult, that it looked weird, so I stopped it.
No complex internals, just standard stuff.
Front sight is from The Dunkis' bullpup model.


Kona-chan (author)2014-11-11

can you remake the ACR and give internals bruh

dr. richtofen (author)Kona-chan2014-11-11

After I post instructions for the most recent thing I posted

Kona-chan (author)dr. richtofen2014-11-12

by the way, you can use the idea of your pump action shotgun in the ACR, to create a ejection port and a open space when you pull the charging handle

Kona-chan (author)dr. richtofen2014-11-12

thank yoouuu

dr. richtofen (author)2013-07-20

"Echt" als in een airsoft vizier ;p

Kona-chan (author)dr. richtofen2013-07-23


en ik zal je iets leuks vertellen,
ik heb een nieuwe gun gemaakt en ga hem waarschijnlijk posten;

Mini/micro Uzi(hij's groot dus daarom twijfel ik xD)
3 laags, met remove mag(ja mijn kleine geheime systeem~)
folding stock(best wel "crappy" omdat ik bijna geen goede knex meer had >.>)
echte trekker!
zoals in CoD heeft ie een charging handle die ook sight it c:

Kona-chan (author)2013-05-29

ik hoop dat die poster van je zus is xD

dr. richtofen (author)Kona-chan2013-05-29

Is ie ook, maar volgens mij gebruikt ze die niet, aangezien zij ook niet van 1D houdt

Kona-chan (author)dr. richtofen2013-05-29

niemand houdt van 1D .3.

dr. richtofen (author)Kona-chan2013-05-29
Een vriendin van men zus vindt 1D wel leuk. Toen stuurde ik via whatsapp onderstaand lied (wat ik zelf echt een awesome lied vind), vond ze niet zo leuk :3
nerfrocketeer (author)2013-04-19

Cool sniper rifle. Wish it would've worked... :(

Thanks (which one, btw?) Yeah, it'd be cool if they worked, I agree

The topmost bolt action model

hellmaster993 (author)2013-02-04

nice guns dude


dr. richtofen (author)2013-01-09

That's too bad. Are you working on anything at the moment?

Ben_the_Builder (author)2013-01-08

this looks like it had some potential

Thanks. Warhawk One's original shot

no worries ^_^ and shooting or not this is awesome : D are there any more pictures of this? i'd like to have a go at making internals for it myself, if that's okay?

I don't have more photos of it, but I can rebuild it soon if you want. The internals aren't that hard

awesome : D i have a spare box of pieces laying around, so i should be able to make internals for a mag, mag well, trigger and firing pin, and maybe if I'm lucky I'll be able to make some kind of barrel : D

Cool. I'll get some photos after the exams of next week

dr. richtofen (author)2013-01-07

Thanks =)
Looking forward to see those guns, but what happened to the WA2000?

This is pretty good, but do you realize how easy it would be to make this shoot?

Lol, yeah it would be easy to make it shoot probably. I just don't have any big bands left. The one on the magwell is realy old and meh.

Meh, its not VERY good...It's alright though.

I know. This was one of my least favorite looking models. It was pretty fun to play with it though, it just didn't look too good IMO. How y'a like the sights?

dr. richtofen (author)2012-07-21

Haha, me too I think. (btw, what is honey cakes? o.0)

Honey cakes is your new nick name! Ha!

~KGB~ (author)dr. richtofen2012-07-21

Sounds like girly sayings lol XD

OMGOODNESS! THAT P90 IS FREAKING EPIC! I am so building a moded version soon...I am gonna try and make it breach loaded (I really like the BL idea right now!) Your P90 is AWESOME!

Thanks! I like the BL mech too :)

LOL, that makes three of us!

PotatoCoffee (author)2012-09-13

Sorry about this, *meet.

An Villain (author)2012-08-02

I really like the bolt-action model. It would be cool if it could shoot...

~Meme~ (author)An Villain2012-09-13


dr. richtofen (author)An Villain2012-08-12

Thanks. I can maybe try if I can put a slingshot mech or so on it. I don't think it will work with the bolt I used on it.

An Villain (author)dr. richtofen2012-08-12

A sling sounds even better.

dr. richtofen (author)An Villain2012-08-12

Yes. I'd like to try. I've rebuilded it. But i'm out of parts that i need for such a mech. >.<

An Villain (author)dr. richtofen2012-08-14

That always sucks.

dr. richtofen (author)An Villain2012-08-15

True. I don't have enough yellows to make the top part (where the bullets go inbetween while propelled by a band)

An Villain (author)dr. richtofen2012-08-15

Are there any pictures of what you do have?

dr. richtofen (author)An Villain2012-08-16

Not realy, I had just enough to build the Z35 with shortened stock (yellows)

An Villain (author)dr. richtofen2012-08-16

I see.

dr. richtofen (author)2012-08-14

Ok, nice. I'd like to see the concept. I have a modded version of this now (bigger mag, and the stock that is like the m4ish one)

dr. richtofen (author)2012-08-14

Yes, a bit. I like the shape of his bolt

XxsonicxX (author)2012-07-25

I see you got the bretta 93 raffica. how does it work?

dr. richtofen (author)XxsonicxX2012-07-26

It works great. It can be shot in full auto, but after a few seconds, a bb jams it. So I only use semi and 3 burst.

About This Instructable




Bio: Hey there. I won't add too much info here, as it'll show up as one big paragraph.
More by dr. richtofen:K'nex Magpul PDR instructionsLever Action Rubberband Gun - InstructionsSteyr AUG A2 instructions
Add instructable to: