Print PDF
Favorite
Email
Step 3Removal of Broken LCD
In this step we remove the broken LCD and replace it with the new one.
- Detach the LCD and backlight from the camera body by sliding it out from underneath the snaps. You may need to pry it in some spots.
- Fold the backlight and LCD over, exposing the ribbon cable
- Unplug the LCD ribbon cable from the socket at the base of the camera. This should be done slowly and carefully. I recommend gradually easing out the cable by wiggling it back and forth.
- Remove the LCD
So far, so good.
- Detach the LCD and backlight from the camera body by sliding it out from underneath the snaps. You may need to pry it in some spots.
- Fold the backlight and LCD over, exposing the ribbon cable
- Unplug the LCD ribbon cable from the socket at the base of the camera. This should be done slowly and carefully. I recommend gradually easing out the cable by wiggling it back and forth.
- Remove the LCD
So far, so good.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
