With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Have you ever found yourself cupping your hand around the side of the iPad to get a little more volume out of that single speaker? Let SoundScoop do a...
Sheet of craft foam (as you can see by the picture it's sold by different names). Hot glue gun x-acto knife (preferred) or scissors p...
Download the pattern from this link then print it out.
Cut out the pattern with your choice of tool. I prefer to use an x-acto knife.
Using a pencil or pen trace the outline of the pattern onto the craft foam. I used lime green so it would be easy for you to see.
Again using your preffered method cut out the scoop from the craft foam. Don't forget the slot.
Get a feeling for how the edge overlaps. Put a shot of hot glue in the approximate area of where the spot is on the photo. Press together.
Good job.
Slide it on the corner edge of the iPad centered under the speaker. Enjoy your enhanced volume!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »