Print PDF
Favorite
Email
Step 7In the Moscow forge, on the Moscow anvil
This was actually quite difficult since bending things is not something I do very often.
Basically, I ended up bending the long bits to 90 degree angles using the vice, then I put the corner in the vice and bent it the rest of the way with the hammer.
Basically, I ended up bending the long bits to 90 degree angles using the vice, then I put the corner in the vice and bent it the rest of the way with the hammer.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
