Instructables

Space Invader Pop Up Card


space invader pop up card

   


How to make an origamic architecture pop up space invader card.  Suitable for machine or hand cutting.

Materials:
1 piece of cardstock for space invader (purple)
1 piece of cardstock for space invader background (black)
1 piece of cardstock for outer card (black)
2 downloadable templates
                 

 

 
Remove these adsRemove these ads by Signing Up

Step 1:


Download template in PDF, or DXF page 1 and DXF page 2.

Page 1 looks like this.
space invader pop up card

Page 2 looks like this.
space invader pop up card

Step 2:


Cut page 1 and 2 from contrasting paper colors. I cut page 1 from purple and page 2 from black.


Cut pieces on black cut lines. Score on red fold lines.


Start working each fold line into place by pushing the space invader from the back of the card and pinching along each fold line on the front.

Warning: work on the single cubes at the top very gently. Each is attached to the rest of the antenna by a fragile triangular bridge.

space invader pop up card

Working from the back, push each cube forward, pinching the folds on the back.  

Start closing the card.  As the space invader collapses, continue to crease each fold line until the piece folds flat.


 


 

Step 3:


Once the invader is cut and the pop up part is folded, open the invader piece.  Slide the background cut out onto it.


space invader pop up card


space invader pop up card

Check the fit, than spot glue the two parts together.

space invader pop up card

Step 4:


Back the entire piece with another piece of cardstock (mine is black).


space invader pop up card

Cool! Nice trick you used there to prevent cutting off the antena :)
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!