Print PDF
Favorite
Email
Step 11Sew Negative Trace to Sparkle LED Negative
Sew 4 ply thread into the negative trace making sure to have full contact between the 4 ply and the 6 ply.
Sew into the negative LED terminal on the Sparkle board.
Loop the tread 3 times thru the negative terminal.
Follow the negative thread back to the 6 ply trace encased in the satin stitch.
Bury the thread tails into the satin stitch again making contact with the 6 ply thread.
Sew into the negative LED terminal on the Sparkle board.
Loop the tread 3 times thru the negative terminal.
Follow the negative thread back to the 6 ply trace encased in the satin stitch.
Bury the thread tails into the satin stitch again making contact with the 6 ply thread.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
