Print PDF
Favorite
Email
Step 9Sew Positive Trace to Sparkle LED Positive
Using 4 ply conductive thread and a hand sewing needle sew into the positive trace.
Make sure the 4ply is in full contact with the 6 ply thread encased in the satin stitch.
Sew into one of the the positive terminals of the Sparkle* board. - this is the hole closest to the positive terminal for the battery attachment.
loop the conductive thread 3 times thru the terminal hole and then sew the tread back into the positive trace burying the tale ends of your conductive thread then cut the needle free.
Make sure the 4ply is in full contact with the 6 ply thread encased in the satin stitch.
Sew into one of the the positive terminals of the Sparkle* board. - this is the hole closest to the positive terminal for the battery attachment.
loop the conductive thread 3 times thru the terminal hole and then sew the tread back into the positive trace burying the tale ends of your conductive thread then cut the needle free.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
