Introduction: Speakil Case
Have been thinking of creating a reason for our softy of a teacher to let us listen to music during class. This is perfect. "miss i havn't tested out my speakil case And i really want to...."
Entering the art of sound contest.
Please let me know if you have any questions or any ideas on how to improve this.
Step 1: What You Need
you will need:
+ a soldering iron
and hot glue gun.
Step 2: Step 1
Fold pencil case inside out ready to mark were the speaker will go.
Step 3: Step 2
mark circle around the speaker.
Make sure you cut the circle about 5 mms in from were you marked to be able attach the speaker.
Step 4: Step 3
Cut out the hole for the speaker to get that clear sound.
REMEMBER: cut the circle about 5 mms in from were you marked to be able attach the speaker.
Step 5: Step 4
Attaching the speaker.
I Attached the speaker by hot gluing it. Some other gluey substance may work better.
Step 6: Step 5
Soldering the earbud port on.
To find out how to prepare the earbuds for soldering click here.
solder each wire to a seperate port on the speaker. ( + and - ports)
Step 7: Step 5 (final)
Flip the Pencil case back (outside out) plug in your ipod and put either in or outside the pencil case. Hopefully you all like it.