Introduction: Speed Drop Coaster

Picture of Speed Drop Coaster

This is the Speed Drop Coaster and it is made from the Loopin' Lighting and Serpent Spiral Coasters.  It contains 510 pieces and has 8 steps.

Parts Count:  Make sure that you have all of these parts before you begin building.

Rods
Red 66
Grey 33
Blue 21
White 8
Yellow 4

Connectors
Grey 63
Blue 20
Yellow 5
Red 8
Orange 3
Black 2
Tan Y Connectors 4

Small/Big
Yellow/green connector 17

Specials
Black gears 2
Tracks 9
Chain guides 10
Motor 1
Blue spacers 2
Silver spacers 25
Chain links 147

Total pieces 510

Step 1: Base: Part 1

Picture of Base:  Part 1

Congratulations!  You are going to start building the base.

Step 2: Base: Part 2

Picture of Base:  Part 2

You are on the second part of the base construction where all the loops are.

Step 3: Tower: Part 1

Picture of Tower:  Part 1

Congratulations!  Now you are on the Tower!

Step 4: Tower: Part 2

Picture of Tower:  Part 2

You are on the last part of the tower.  After you finish this part you will be on the tracks.

Step 5: Track--Part 1: Hill

Picture of Track--Part 1:  Hill

You are on the tracks!  You are going to start off by making the hill.

Step 6: Track--Part 2: the Drop

Picture of Track--Part 2:  the Drop

Here comes the first drop!

Step 7: Track--Part 3: Crazy Loops!

Picture of Track--Part 3:  Crazy Loops!

Finally, crazy loops at the end of the ride!

Step 8: Chains and Cars

Picture of Chains and Cars

Congratulations! You are on the last step! Now all you need to do is put on the chains and cars.

Comments

~KGB~ (author)2011-01-15

not bad!

apz (author)~KGB~2011-08-11

thanks.

~KGB~ (author)apz2011-08-11

np

Tornado96 (author)2011-01-16

Pretty good for your first. Try to get more speed out of your height. Alos try to make your turns A LOT larger to reduced friction!

apz (author)Tornado962011-08-10

try my newest coaster.

About This Instructable

834views

5favorites

License:

More by apz:quadruple sCurvy CorkscrewSpeed Drop Coaster
Add instructable to: