Print PDF
Favorite
Email
Step 2Bad Luck? (Covering the Mirror)
Separate the cork board from its frame (I just used a saw) and then cut the cork board to fit over the mirror of your medicine cabinet. Note: Your cork board should already have its own backing, which you need.
Glue the cork board (with its backing) to the mirror (Gorilla Glue works well here -- what the heck is this stuff made of??) CLAMP IT, or weigh it down until it's dry.
If you have a gap between the cork board and the frame of the cabinet, run a line of the cord or rope and glue this down into the gap (I used a hot glue gun).
Glue the cork board (with its backing) to the mirror (Gorilla Glue works well here -- what the heck is this stuff made of??) CLAMP IT, or weigh it down until it's dry.
If you have a gap between the cork board and the frame of the cabinet, run a line of the cord or rope and glue this down into the gap (I used a hot glue gun).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
