This is not hard to do. You can see my stages of learning below. By #4 dog I am professional.
You need:
dogs of your choosing
fave dog slicin' knife
long drill bit, (or round skewer if you have things like that)
Carefully push drill directly down the center of the hot dog.
Keep the knife at the same angle as you slice thru to the drill bit, and roll the hot dog away from you as you continue down the length of the dog. (pics 1 & 2) May or may not take you a couple trys to get method of nice tight coil.
See that I boil the dogs! (pic 3) Microwaving does not produce satisfactory results, IMHO. Slide the dog off the bit and into the water. Kinda tricky to fish 'em out, I used a spatula. Straining would be clever, if you have a colander.
You need:
dogs of your choosing
fave dog slicin' knife
long drill bit, (or round skewer if you have things like that)
Carefully push drill directly down the center of the hot dog.
Keep the knife at the same angle as you slice thru to the drill bit, and roll the hot dog away from you as you continue down the length of the dog. (pics 1 & 2) May or may not take you a couple trys to get method of nice tight coil.
See that I boil the dogs! (pic 3) Microwaving does not produce satisfactory results, IMHO. Slide the dog off the bit and into the water. Kinda tricky to fish 'em out, I used a spatula. Straining would be clever, if you have a colander.
Visit Our Store »
Go Pro Today »
space the spirals about 1/4 to 3/8 apart.
Mix warn cream cheese, crisp or real bacon bits fine grind, fine shred sharp cheddar cheese, very fine chopped and towel dried Jalapenos. needs to be very soft.
Grab your beef jerky gun with the small tube attachment, fill the spirals and wrap/roll in wax paper and chill. I squeeze the cheese mix to fill in the air pockets.
Prepare your favorite corm meal batter mix mix, for corn dog consistency
Dip your corn dogs and deep fry them!
Enjoy
I am following the recipe except using buttermilk pancake batter for the outside and pepper jack cheese to wrap around the outside of the dog.
Very much appreciated!
What did you use to cut the slot in the PVC? And at how much of an angle, 45 degrees or what?
Mustard for hot dogs
Catsup/ketchup for hamburgers
Mayonnaise/Miracle Whip for sandwiches
;-)
The french fries are the condiment for the taco meat and cheese......
and Guacamole!
also, it sounds delicious.
This seems to be a perfect solution for people who like to load up their dogs- the stuff would set in the bun so much nicer this way!