Instructables
loading
loading
Picture of Spitball Pen Gun
A great way to annoy people
 
Remove these adsRemove these ads by Signing Up

Step 1: Get a pilot g2 pen

Picture of Get a pilot g2 pen

Step 2: Unscrew it and push out the clicky part with the ink

Picture of Unscrew it and push out the clicky part with the ink

Step 3: Get a paperclip and push out the spring

Step 4: Put the long part back in the top, then put the spring, then put the other part back in.

Picture of Put the long part back in the top, then put the spring, then put the other part back in.

Step 5: Cock it with the ink

Step 6: Next, with scissors, saw off the tip of the pin.

Picture of Next, with scissors, saw off the tip of the pin.

Step 7: After you do that, screw it on, put amno down the barrel, aim, and click the pen!