Print PDF
Favorite
Email
Step 2Make the Splivel Plates
This is the hardest part of the project - the Splivel plates. (Wearing safety glasses and gloves!!!) Take the 1-3/8" flat plate and cut it into sections with the hacksaw. Each full section of strap plate will give you 15 Splivel plates (you need 18+). Cut the strap into pieces that have three holes each.
When finished cutting use a grinder or file to take off the sharp edges.
When finished cutting use a grinder or file to take off the sharp edges.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
