Print PDF
Favorite
Email
Step 6Assembly - Splivels (part 2)
Once the carriage bolts have been assembled and the glue is dry (usually takes about 30 seconds to set), you can the finish the assembly of the Splivels.
Right now, you only need the hex bolt snug. When everything is assembled, you can lock these down (to keep the joint from moving) or you can keep them snug tight to allow reposing or "dangling" effect.
Right now, you only need the hex bolt snug. When everything is assembled, you can lock these down (to keep the joint from moving) or you can keep them snug tight to allow reposing or "dangling" effect.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
