Instructables
Spoke POV is an easy-to-make electronic kit toy that turns your bicycle wheel into a customized display! The project includes a free schematic design, open source software for uploading and editing stored bitmap images, and a high-quality kit with all the parts necessary to build your own.

Tired: A red blinker on your seatpost
Wired: Programmable full-wheel images in any color

Specifications and Features:
  • Can be used with road, mountain or BMX wheels!
  • 30 LEDs on each side (22 for BMX) x 256 radial pixels
  • Runs on 2-3 AA batteries for 10 hours or more, assuming 3000mAh alkalines and 50% image coverage.
  • Can run on rechargable NiMH AA's
  • Comes with high-brightness red/yellow/green or blue LEDs
  • Automatically shuts off after 3 minutes
  • wxPython based software runs on any Linux or Windows or Mac with Parallel port or serial port
  • Design is all through-hole parts, perfect for a first time kit builder.
  • With one spoke, total persistence at 15mph. Two spokes, 10mph. Three spokes, 7mph. (Assuming a mountain bike wheel). Looks cool even if not completely persistant.
  • Great for safe riding at night, provides excellent side visibility.
  • Playa-tested!

Kits & PCBs available for purchase at http://www.adafruit.com/
For more information, like how to use the software to update images, visit http://www.ladyada.net/make/spokepov

& check out more cool projects at http://www.ladyada.net/
 
Remove these adsRemove these ads by Signing Up

Step 1: Intro

These instruction assume you purchased the kit or at least the PCB. All parts are through-hole and this should be a very easy project, even for a beginner. Still, if you've never soldered before, this tutorial is really awesome. If you're part of the new streaming-video-generation, this set of soldering mpegs may do you right:
http://radiojove.gsfc.nasa.gov/elab/soldering.htm
1-40 of 210Next »
dA SQuiD3 months ago

das bosss

ISAC CLARK4 months ago

hi. looking on the adafruit site for the kit, however im wanting to mount this on my ceiling fan, which im not sure works because of speed issues, also, the magnet that triggers it probably wouldn't work. so id like some ideas on what I should order and or do to mount this setup to my ceiling fan. thanks in advance.

wishes5 months ago

how/where can i change this to be RGB? seems limiting and silly paying so much for a kit of one colour when i would happily pay more for RGB

Can you use this on car wheels?

Forward facing lights can only be withing a certain range of white or yellow in many states, and back lights are strictly red, except for when reversing. These laws are nullified, however on private roads and parking lots.

I would say that if you used thios on car wheels you are setting yourself up for a mighty big fine. Most states do not allow you to use any auxiliary lights in the colors of red, blue or white because most of the safety vehicles like police fire rescue us those colors.
how about purple?
micah1_87 months ago

Now, to find a way to run this off mains and motorize the wheel... cheap outdoor digital signage!

ChippMarshal7 months ago

I might give this a try. Thanks.

i was wondering if the batteries would fall out if you went too fast. Would they?
robochick1 year ago
Omg ladyada, you totally used the same terms from Wired magazine. Awesome way to make a long story short! Haha
can I use 25LC1024 instead of this EEPROM?
GusN3 years ago
Can you replace the LEDs with Tri-Color LEDs (with red, green, and blue) to make a Spoke POV that can display all three colors? Are there RGBY LEDs that can display all three colors? And where can I buy them?
try making three w/ one red, one blue ,and one green and burn respective color channels onto them
asofia2 years ago
are these for sale?? Like would you be willing to make them and sell them? :)

I just bought a really awesome custom bicycle I designed at: www.villycustoms.com and the only thing I think could make it better and more unique than it is right now, would be this, this is great, specially for Christmas time! :)
DSC_0507.jpg
kits for sale http://www.adafruit.com/products/5 again, soldering required
1 how mutch does this cost
2 can it be put on a chaos freestyle bike
3 can you make and sell them ?!?!?!?!?!?
I have the same bike ... $38 http://www.adafruit.com/products/5
some soldering required
yanadica2 years ago
gggggggoooooooooo ccccccchhhhhhhhhhhhheeeeeeeeeelllllllllllllllssssssssssssaaaaaaaaaaa!!!!!!!
timweaver172 years ago
how does it handle the weather and or the elements?
jj.inc2 years ago
What if your computer isn't old enough to have one of those ports
How do these kits hold up with impact? like if you're hopping a curb or going over a speed bump? Also, can you waterproof the boards at all? maybe use scotch guard?
TSC2 years ago
Thats sick! awsome great job!
tyson.ras5 years ago
What would it take for you to just build me a pair of the pac man lights and send them to me? I really serious about this.
same here. but ill pay what you want.
(between 0.01 and 20.00 )
not like 1,000,000 $
SniperCzar4 years ago
Anybody know a way to put this on a car wheel/legality of doing so?  I would love to put this thing on the wheels of my wip EV conversion...
thoes cost a fourton to but the tires with this built in.
you should solder it in to your car tire to do that
its perfectly leagal, they even sell rims with that kind of thing built in
i would love to do a small one on a sport bike and a el wire jacket for a tron look
I'm pretty sure it depends on the state.
Love the chelsea fc one
johntan2 years ago
sku_104478_1_small.jpg
kkhan102 years ago
where i can buy that all things ? an i can fix that on alloy ?
linda chen2 years ago
wheelset
Aerodynamic, lightweight, durable
One year warranty and damage replacement policy.
it means you can use them with confidence – even on rough roads – without worrying about rider weight restrictions.

no matter you need one basic-level model, or middle-level model, or high-end model for your market. you can find them here.

these are all the best value for your money.
Welcome to visit our Company Website: http://mtbbike.en.made-in-china.com/
Anything i can do for you,pls contact me via
Yahoo: linda.frxbike@yahoo.com
gener_i5 years ago
Can I replaced you AVR tiny to PIC MCU which is more widely available here in the Philippines,can you recomend what kind or part number of PIC can replaced you AVR MCU
kantutan sarap saya
sucala.paul3 years ago
In the animations above we can see how the image would look if "the observer" wold have the same speed as the bike. What happens when observer stays? In this case the spokepov will make a sort of sinusoidal motion and image may be distorted, but not sure how it looks.
shaadmahmud3 years ago
hi..can i use 24 or 27 series eeprom instead of 25LC080...please help me
iceng3 years ago
I have built seven sets of three for my kids (married) for Burning Man over the years.
Not A Single Difficulty. This is a great product !!!

A
thier4 years ago
I'm having troubles when I try to  Burn the programming at the microcontroller and. And the instructions that I have got here  in the  web site do not report anything about the burnig process.
I WOULD LIKE TO KNOW IF SOMEONE FROM THE SKY, COULD HELP ME AT THE BURNIG PROCESS!
My e-mail adress is:   dougfb46@hotmail.com or
                                        dougfb46@gmail.com

Thanks by the way.

1-40 of 210Next »