Print PDF
Favorite
Email
Step 16Plug in Microcontroller chip and EEPROM chip
Put the microcontroller in the large socket so that the notches match up. The sensor can 'lean' on the microcontroller. If you want, you can use a bit of glue to support it.
Flip the board over and place the EEPROM in the smaller socket so that the notches line up. You're done!
Flip the board over and place the EEPROM in the smaller socket so that the notches line up. You're done!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![[blog 2006-04-15] Instructables Project Contest - March 2006 - Results!](/static/defaultIMG/default.SQUARE.gif)
