Step 10: Step8: Assemble All Parts in the Battery Holder

Insert SD card and USB Wifi dongle into the Raspberry card.
Connect Micro-USB contact and the angled audio cable to Raspberry.
Insert the 24V to USB converter. 
Connect the USB and Audio to the cassie connectors.

Connect the power and turn on the box!

After 10 seconds a green led starts flashing on the Raspberry Pi when it starts booting. This is OK. If not check the forums mentioned in the webpage att Step6.

After 20-60 seconds the led of the Wifi dongle starts flashing. Thats also normal.

About This Instructable



More by Lydhig:Spotify & Airplay Boombox from a HK Go+Play II 
Add instructable to: