Print PDF
Favorite
Email
Step 4Modify the Wiring
1. Cut the white/clear wire and the red wire about 2 inches from the 4-pin connector.
2. Solder the two white wires from the 2-pin white connector wire we removed from the original speaker (Step 1 #6) to the two loose ends of the white/clear and red wires you just cut. (Don't solder it to the two remaining wires on the connector)
3. Cut two lengths of wire about 6" long. Solder one wire (in my case, black) to the white/clear wire and one (in my case, red) to the red wire at the 4-pin connector.
4. Solder the other ends to the microphone in the horn. Red to positive (+) and black to negative (-).
2. Solder the two white wires from the 2-pin white connector wire we removed from the original speaker (Step 1 #6) to the two loose ends of the white/clear and red wires you just cut. (Don't solder it to the two remaining wires on the connector)
3. Cut two lengths of wire about 6" long. Solder one wire (in my case, black) to the white/clear wire and one (in my case, red) to the red wire at the 4-pin connector.
4. Solder the other ends to the microphone in the horn. Red to positive (+) and black to negative (-).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
