Print PDF
Favorite
Email
Step 3Second Skin
I put this together in a hurry, so I grabbed a box that I got a replacement iPod shipped in. It actually worked out really well - the circuit board is exactly the right size for the pre-cut foam. I just cut a hole for the 9v battery and a couple holes for switched.
I would have liked to mount the CE switch (lower right), but I ran out of time. As it was, it actually worked better. It made the device easier to handle while moving toward an audio source. In the next design, I'd add a 1/8-inch microphone port to use a PC-style mic, I think.
I would have liked to mount the CE switch (lower right), but I ran out of time. As it was, it actually worked better. It made the device easier to handle while moving toward an audio source. In the next design, I'd add a 1/8-inch microphone port to use a PC-style mic, I think.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
