Print PDF
Favorite
Email
Step 5Setting up the Pump and Filling the Reservoir
To set up the pump you need to attach the hose. My pump had a small removable adapter that came out of the outlet of the pump. I stuck that into one end of the air hose, then pushed the adapter into the pump outlet.
The pump itself had little suction cup feet that I stuck to the bottom of the reservoir underneath the jug, and then fed the hose up and into the hole I'd cut in the top of the jug.
After that I cranked up the hose and filled the reservoir about half full.
The pump itself had little suction cup feet that I stuck to the bottom of the reservoir underneath the jug, and then fed the hose up and into the hole I'd cut in the top of the jug.
After that I cranked up the hose and filled the reservoir about half full.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
