Make a stage! - With roll out bed!

Step 3: Assembling the legs

Firstly you will need to decide what size you stage is going to be.. If you are having a pull out bed I would recomend nothing over 2.5m wide. Other wise it can be as big as the whole room! I would also note where the plug points are so you can access them.

My stage measured 238cm by 120cm. I will give the instructions for my size stage.

First lay two legs, 120cm apart (Or how wide you stage is) at each corner of your room then lay one in the middle of those two (at 60cm). Next lay 2 legs at 80cm Increments (beetween each side of the stage at the back). Lay them at were the back of your stage is going to be.