This project is part of the OpenChord.org Guitar Hero controller series, and in this instructable I'll be making the pedal specifically for the OpenChord V1 controller, who's instructions you can find here. However, this also works for any other guitar hero controller.
For more information, please visit www.OpenChord.org!
Step 1: Basic Theory + Parts
1 guitar foot pedal
2 long strands of wire, at least 4 so feet long - ideally, these strands will be connected together
1 Guitar Hero controller
Heat shrink / electrical tape
Optional (and used in this instructable)
Small bits of wire
Wire connectors - I wound up using an actual guitar cable I had lying around, but if you have a male/female set of audio jacks, those will work nicely too. This will let you store the guitar and pedal separately.