Watch the video or follow that Instructable
Step 3: Fix pins and ribbon
Step 4: Spool the ribbon around the pins
Every pin must be wrapped 3 times.
Following the Image Notes, the order of wrapping is: 1-2-3-1-2-3-1-2-3.
For a clarification of this step you can watch the video:
Step 5: Take out the ribbon
remove the 3 pins, and take out the ribbon keeping the central pin.
Step 6: Pull apart the layers
You can check this step in the video.
Step 7: Roll and pierce the end of the ribbon...DONE!
Remove the pin and.. BINGO! the ribbon is done =)
check the video for clarification about the steps:
Remember: you can make ribbons of every size and color just changing the ribbon roll.
I hope you enjoyed this instructable!
Happy Holidays from BlindSight (How2Make.It)