Print PDF
Favorite
Email
Step 3Building Thickness
-Take your template and trace it 6 to 8 times depending on how thick you want the badge to be.
-Cut these trackings out and glue them together.
-While the cuttings dried I placed them under some text books to ensure proper contact of the layers. -Note that I also glue sticked the template on the top layer. We will later use that image to aline the other two parts of the badge.
-Once the layers have tried you'll notice that they may not be perfectly flush with each other. Take your scissors and using one of the blades scrape the sides of the badge until they become flush. It doesn't take too much effort or force.
-Cut these trackings out and glue them together.
-While the cuttings dried I placed them under some text books to ensure proper contact of the layers. -Note that I also glue sticked the template on the top layer. We will later use that image to aline the other two parts of the badge.
-Once the layers have tried you'll notice that they may not be perfectly flush with each other. Take your scissors and using one of the blades scrape the sides of the badge until they become flush. It doesn't take too much effort or force.
starfleet badge al.doc208 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
