Introduction: Star Wars Quote Woodburnt Wallhanging

I think this is a really nice gift for a Star Wars lover and it is quite simple to make. If you like this instructable please vote for me in the sci-fi and homemade gifts contest! Thank you!

Step 1: What You Need

Stencil - I just printed this one out.
Craft cutter
Wood - I had this piece left over from a previous project. All I had to do was sand it down.
Hook - This is so it can be hung up on the wall. I picked these up in a hardware shop.

Step 2: Cutting the Words Into the Wood

Place the stencil over the wood. It might be an idea to tape it down so it doesn't move rather than holding it down. Using the craft cutter, cut along the words, making sure you cut the wood too.

Step 3: Outline in Pencil

This step can be skipped depending on how deep you have cut. I find it easier to see the pattern when it is highlighted with pencil.

Step 4: Start Burning!

Carefully burn the pattern out of the wood. My burning tool got very hot after a while so I had to stop and let it cool down because I kept burning my pinky finger! :(

Step 5: Add the Hook

Place the hook in the back of the wood near the top in the middle.

Step 6: Finished!

I like the bare look of the writing but you could fill it in if you'd prefer. This is my first instructable so I hope it was easy enough to follow! Thanks for reading!


smileydude3 made it! (author)2016-06-22

Could I possibly use a soldering iron or something else, I don't have a wood burner.

clookie made it! (author)clookie2016-06-27

I don't really know because I've never used a soldering iron for anything!

Penolopy Bulnick made it! (author)2016-01-07

This is great! I just got a woodburning kit, might have to give this a try :)

clookie made it! (author)clookie2016-01-08

Thanks! Glad you like it! ☺

About This Instructable




More by clookie:Personalised Guess WhoStar Wars Quote Woodburnt Wallhanging
Add instructable to: