Introduction: Star Wars Pepakura AT-ST
This is a puzzle of the Star Wars AT-ST. As a gift or to decorate your room. It only took about five hours of patience and dedication.
Step 1: Tools
liquid silicone glue
190 grams white paper
Step 2: Prints
You need to print the 3 pdf files. I decided to use a 190 grams paper because it's strong, and you can paint it. Laser print please!!!
Step 3: Let's Start
You must first carefully cut the pieces. I started cutting pieces of sheet 1 and immediately glue the pieces before starting the other one.
You should carefully fold the pieces as shown in the pictures.
Do the same for each piece.
Step 4: Sidepieces
You must glue 4 rectangles to each side piece.
And do the same for the upper door.
Step 5: The Head
Glue all the pieces as you can see in the picture.
Step 6: The Neck
You must make a hole to introduce the cylinder.
Step 7: The Guns
With the needle make the 3 holes for the guns, and glue to the head.
Step 8: Legs
The same for the legs.
Step 9: The Feet
Step 10: Painting
If you want you can paint it with a black pencil.
3 People Made This Project!
We have a be nice policy.
Please be positive and constructive.