Introduction: Starry Galaxy Glove
You can never go on out in winter without a pair of gloves. And we ladies prefer some bling in anything possible. This tutorial shows how to do-it-yourself a galaxy themed pair of gloves.
Things you will need:
An old T-shirt with long sleeves or an old jersey
Pair of scissors
Thread and needle
Step 1: Step 1
First of all you need to measure out the length of the glove you need and cut out from the sleeves. Mine was 8” long.
If it is loose fitting, you will have to stitch it and cut off excess.
Place the seam to the bottom, which is to your palm side when you wear it. And place your hand over it and put a cut in the place right above your thumb as shown in the picture.
Step 2: Step 2
This is how it should look when you wear it on.
Put drops of glue to paste the rhinestones, I’m using iron on rhinestones which needs to be pasted and then ironed to last longer.
Thread the needle and start to sew stars in long stitches. I have stitched 3 stars in each glove, you can sew many as you wish.
Step 3: Done :)
And there you are with a bling bling galaxy gloves :)