loading
Stash can Is just a name!

I made these from chewing tobacco cans that the paan wala (beetle leaf vendor) throws away! I bring them home instead.

Dimensions of can: 3inch Diameter x 4 inch height

Process:
1.Sanding the can and cap by hand to remove the paint
2.Putting up a layer of red oxide (primer) and drying overnight.
3.Applying a base coat of green (acrylic paints used for fabric) and drying for 4 hours
4.Painting with black yellow, red, white and green (acrylic paints used for fabric)

Have left a thin layer at the top unpainted! The paint makes it impossible for the can to be recapped, or the paint gets chipped by the cap.

Hope You like it.
The name Vaidehi is for: http://www.facebook.com/vaidehiart
Very cute! Very pretty painting :)
Thanks!

About This Instructable

554views

4favorites

License:

Bio: I am a hobist with lots of hobies from carpentry to mechanics. There is hardly any thing that i am not interested in.
More by artworker:2 Minutes DC Motor Top attiny2313 based electronic hourglass 3 Part Box Puzzle 
Add instructable to: