Steampunk Goggles

Step 9 The Strap

To attach the strap, punch three holes on the end of each leather eyepiece. Thread your needle with an arms length of thread, and stitch one end of the strap onto the back of the eyepiece, overlapping about 1/4 inch. Simply go back and forth through the three holes and over the edge several times, then tie it up in the back and cut off the tails.

Now put the goggles on and find out where to trim the strap so it fits snugly on your head. Trim it, leaving about 1/4 to overlap for stitching, then repeat the above to finish fastening the strap to the goggles.

Comments

[SciriusDoomus]

I just did a shitload of loops on the three holes individually. Kinda like: \ I /