Introduction: Steampunk Heart Necklace!

About: maker, steampunk lover!

Today I'm going to teach you how to make a steampunk necklace with a heart shape:

Step 1: Cut the Sheets on Wood

To begin cut the previously drawn templates in a not very thick wood, for this use a bank saw.

Step 2: The Aluminum Can

Then I removed the paint from a can, and used a small saw to open the can.

Step 3: Cut the Sheets

Now with a sharpie marker draw the template on the sheet and cut it with scissors.

Step 4: Lateral Sheets and Assembly

Having all the pieces of aluminum and wood cut and polished, I proceeded to assemble the sides.

Step 5: The Gears

With a few small gears try to get an old finish by polishing them just a little.

Having done this I proceeded to put them in place, and nailed the covers in place.

Step 6: The Nails

With small steel nails, very carefully hammer the insoles in place to finish the job.

Step 7: Finish!

And that's how the work ended, I hope you liked it.

THANKS FOR VOTING! ;D

Jewelry Contest 2017

Third Prize in the
Jewelry Contest 2017