Today I will present you my newest Steampunk-Design Workshop creation.
Here you can read something about how i got the idea to built my first Steampunk Laptop.
Because my pictures are soo poor...
I deside to take a video in HD, you will enjoy it!!!
Depend on the diversity of the basic Laptops you get in this world I can show you only an overview of the single steps and the trouble you get with single parts…
For my Steampunk Laptop I use my first Laptop which still works well but is now too slow for newest applications.
It still works well for Videos, Music and Internet.
My model is the Toshiba Satellite 1100.
- Toshiba Satellite 1100
- Big Wooden Gingerbread Box
- Profiled Timber
- Old Brass Car Horns
- Copper T-Pipe
- Brass Caps
- Knobs in different sizes
- Red Velvet
- Brass E10 Bulb base
- Wood Stain
- Wood Wax
- Hinge Joints for Box lid and Keyboard
- Enough Time
Step 1: Disassembly of the Laptop
Also take some pictures of the metal shield.
Some parts don’t work when they are not connected over the metal shield to ground.
For example the touch pad there is a Brass plate on the lower side.
I don’t connect it to shield/ground and the touchpad don’t work.
After few hours I recognise that there was a small metal sheet mounted which I miss I supersede it by a cable.