Steampunk Web cam cover

Step 4: Final stuff.

The knobs if you have not guessed are from a light fixture, I used some of the brass tubing to extend them out, to cover my poor design of where to mount the brackets, the brass knob is just a cut off peice of the candle stick base made to look like a fancy finger nut.
(the one that holds the copper bracket to the base.

The pic is of the finished knob, and the peice before it was cut off and polished.

Any way that is my first step by step, I know it's not going to help much but it did help me with the process, plus the cam does not look bad it, matches my monitor.