Instructables
loading
loading

Step 4: Electrifying I (with 1,5 Volts flash unit)

Picture of Electrifying I (with 1,5 Volts flash unit)
CIMG1219.JPG
CIMG1226.JPG
CIMG1227.JPG
CIMG1228.JPG
CIMG1229.JPG
CIMG1230.JPG
CIMG1234.JPG
Trilampe01.jpeg
Now I show you how the HV-flash unit from the Fuji disposal camera could be placed in the lamp stand. Beyond the red velvet there is a wodden plate which has to  be pulled out. Then insulate the innerside of the brass stand with some tape and place the HV circuit in. Recover the wodden plate again and that´s it
The new switch will be placed in the screw hole at the side of the stand ann fixed with some melting glue. 
 
Remove these adsRemove these ads by Signing Up