## Step 4: Combine the Components

And now you can build the three parts together
<p>my life is on the line of bow of this amazing monstrosity (: i like it ...</p>
high voltage? lol i've been shocked by one of those transformers before. it stings a bit but nothing fatal<br>
Both you and the author are making the mistake of assuming that the dangerous quality of electricity is voltage. As far as I know (do your own research, obviously, before trusting someone's advice with your life) amperage is much more important, which is why capacitors are so dangerous and Van de Graaff generators are so safe. It's possible that energy is actually the issue...in which case high voltages would be safe at low amperages and high amperages might be safe with low voltages.
Mysss is correct in that current is what kills. 5mA is usually painful and only 10 to 15 mA (milliAmps) can kill you. High voltage is considered extremely dangerous though, this is for many reasons. Voltage is like electrical pressure, even if the voltage cant surge through your body and kill you, it can blow a good chunk of flesh off. I have accidently cut a live 120 V line which blew my wire cutters apart. The other main reason is that the human body has an average resistance of 50k Ohm, so say 250v / 50,000 ohms = 0.005 A ( 5 mA). that is enough for some serious pain. Watch out more for anything 600v or above, which is considered true high voltage. Anyways have fun and stay safe. :)
i have learned alot today. lol
<p>ditto</p>
Me too!
Hi wkoepp<br><br>Thanks for your detailed and very good explanation. I absolutely agree with you and Myss too!!<br>Can you help me and all the others who want to present such projects in future and write the technical right formulated security advice new?<br><br>If &quot;Yes&quot; then I will change it as soon as possible!!!<br><br>Thank you very much<br><br>Aeon Junophor
<p>energy is indeed the issue, at high volts, low amps the body's resistance goes down allowing more of the current to pass through. at low volts, high amps the body's resistance goes up allowing less of the current to pass. I have seen people pass 100000+ volts at a few microamps through themselves, I have also seen people pass 800+ amps at &lt;2 volts through themselves as well.</p>
why do signs say danger high voltage?
Because normally in those cases, high amperage comes along with, even though using a transformer to increase voltage, decreases amperage. But high voltage does have heat, and still herts.
Hi mysss<br><br>Let me repeat this important noteagain:<br><br>Thanks for your detailed and very good explanation. I absolutely agree with you and wkoepp too!!<br>Can you help me and all the others who want to present such projects in future and write the technical right formulated security advice new?<br><br>If &quot;Yes&quot; then I will change it as soon as possible!!!<br><br>Thank you very much<br><br>Aeon Junophor<br>
Voltage won't kill you, current will :)
I made it i wanna show u but my only camera broke its so neat nice job a great conversation starter
Awesome...just fantastic...
I love this. Small and very nice. Is that switch final though? It's the only thing that looks a little out of place.Maybe a dial switch? I think this thing is cool as hell though! Nice Work!
Hi Gunther45<br><br>I chose the red cover for a better view in this video and fotos. Afterwards I put it away;-))))))<br><br><br>Cheers Aeon Junophor
Bro, I never knew it was so hard to find a proper switch for a Steampunk project. It's very very hard especially in the states because I wanted a Dolly Switch and we never had them. I always like the piece just thought the switch was out of place but I totally understand now! We got to do what we got to do.
Hi Gunther45 <br> <br>Here are some adresses where you may find such switches, hope this will help <br> <br>http://www.charlieroe.com/art-deco/art-deco-electric-fittings/art-deco-electric-fittings-2.html <br> <br>http://diy.twenga.co.uk/toggle-switch.html <br> <br>And there I buy my switches: <br> <br>http://www.conrad.de/ce/de/overview/0216100/Kippschalter <br> <br>Your Aeon Junophor <br>
Pure Steampunk genius;-) My hat's off again to you Aeon Junophor!
Hey, how are the neon bulb and the plug connected? On the high voltage power supply instructable, it show multiple configurations for the power. Do you use AC or DC for the bulb and plug? Oh and the term you are looking for is &quot;circuit&quot; or circuit board&quot; instead of &quot;electronic.&quot; Great though =)
Hi domdanial<br><br>Thanks for your explanation. I will use the right term in future;-))<br><br>Now to your question: <br>I connected the plug with one contact usinig the AC-variaty and the other contacct goes to the two contacts of the small bulbsocketholder so that both cathodes inside the bulb are working as one. That ist also why I had to insulate the metal part oft the bulb socket above the holder with the black shrinking hose (to avoid a short cut and even electric shock) if this part might have been touched by fingers/hand.<br><br>Hope this details will help ;-)))<br><br>Aeon Junophor
Junophor awesome project as always. you always show good home craftsmanship. This is yet another one of your projects i will have to duplicate.
First of all, awesome idea! This is definitely going on my list of projects to build if I ever get into electronics.<br><br> I noticed you seem to be using &quot;a&quot; and &quot;an&quot; rather oddly. My assumption is that you're using them as if they correspond to different genders of noun? If so, you should know that English doesn't have genders like this. &quot;A&quot; is used before words beginning with a consonant, and &quot;an&quot; is used in front of words beginning with a vowel. The only exception (I think) is words beginning with &quot;h,&quot; for which the article depends on the pronunciation. I think the English are more likely to say, &quot;an hero,&quot; for example, while (being an American) I say, &quot;a hero.&quot; Using &quot;an&quot; implies a different way of pronouncing the word. Anyway, sorry if I misunderstood, and thanks for posting! Now on to check out your other Instructables. =)
dunno what it could be used for, but really cool!
I love neon lamps! I saw a similar flicker lamp at the hardware store and wasn't sure if it was neon or not. Beautiful project!
where do you get the small box for the wires
hello i can't find any of the parts any help i live in adelaide<br>
Nice, it steams punky
Great work, my friend!
Hi Horatius.Steam<br><br>Yes indeed a good work. Thanks for friendship and supporting so much!!!<br><br>Aeon Junophor
Another great invention, I love your work.
Hi bricbracwizard<br><br>Tank&acute;s for your kind comment. Your works are also an inspiration to me;-))))<br><br>Many greetings to Down Under
Dear Aeon Junophor<br><br>Again a great gadget from your laboratory! Wonderful!<br><br>Greetings from Helvetia<br><br>The Chocolatist
Hi thechocolatist<br><br>Thank you very much for your ovations!!<br><br>Let me say that your objects are impressing me too;-))))<br><br><br>Cheeers and greetings from Hamburg, Germany<br><br>Aeon Younphor
Thanks to all and their kindly comments<br><br>You see I am back again.<br> And I love it really much!!<br>I am so pleased that you like my objects. That&acute;s it!!!!<br><br>Cheers to all of you<br> Aeon Junophor
Glad to see another project from you, we had a dry spell there. <br> <br>I wish I could contribute as well but I am on a project that will take at least 1/2 a year so I must rely on the &quot;old timers&quot; to keep my imagination going. <br> <br>This is a wonderful project and it made my day to pop online and see something new. <br> <br>
I have been wondering when you would be back with another great steampunked classic!<br>And as always you have blown me away! This is really cool, Love the overall design Silver &amp; black and brass always go good together.<br>Can't wait to see more! <br>You inspire me allot with you inventions, In fact my steampunked wall light was Inspired by your light tube.<br>
Hi grasshopper1221<br><br>Thank you very much for your patience. Indeed I needed some time for new inventions and now I will present them step by step so stay tuned and have a look at my site;-)))))) <br><br>Your Aeon Junophor