With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
So you want to spread your message with spraypaint, but you don't want your designs to be held back by worrying about pieces of a stencil connecting? Just ...
Here I took Aphex Twin's symbol off the ol' Interweb and converted it into a vector drawing with Illustrator. I then cut the design out of cardboard with ...
Cut it from a spool, straighten out some paperclips, or snip out sections from a coat hanger that's lost its crappy little cardboard tube. Four or five inch ...
You're now going to "bridge" the gaps to the islands. Place at least three wires from the outside of the stencil to the island in the middle. Two ...
Secure the bridges! Ready the ramparts! OK, this is duct tape. Duct tape on cardboard. Duct tape that is holding wire onto the cardboard. I'm sure you're not ...
OK, no big shocker, eh? Kind of anticlimactic, huh? But holy crap, it freakin' works!
Place the stencil on a nice and legal target, such as a piece of masonite with a big blue tarp behind it. The tarp was stained with some ...
Cardboard is thick and the gap is big enough (3-4mm) between the top where the wires are to the target surface that the bridges will become completely invisible. ...
Creating Complex Spraypaint Stencils by Handby Tu
How to Make Stencils with Islandsby noahw
Quick and Dirty 5-minute Laser Stencilby blorgggg
How to make your own clothing labelsby sadiesosha
Easier Screen Printingby Super Cameraman
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »