Instructables

Step by Step Amigurimi Moosehead - easy and beginnerfriendly

FeaturedContest Winner

Step 11: Assembling

Picture of assembling
RIMG1477.JPG
RIMG1478.JPG
RIMG1479.JPG
RIMG1480.JPG
RIMG1481.JPG
take a 3 inch piece of wire
thread it though the back of the head, and through the two holes in the shield,
take the pliers and twirl it together tightly

glue the hanger-thingie on the back of the shield
 
Remove these adsRemove these ads by Signing Up