Print PDF
Favorite
Email
Step 3Clamp and bend
Bolt your microphone bracket centered upon the flexible lamp arm.
Clamp the flexible rod to the table and slowly heat it with the heat gun until the sides start to flop.
The acrylic should be getting rather hot, so I recommend using an oven mitt.
Bend the acrylic into a U-shape until you are happy with the results. Let it cool to harden.
If you are unhappy with the final results, just re-heat it and try again.
Clamp the flexible rod to the table and slowly heat it with the heat gun until the sides start to flop.
The acrylic should be getting rather hot, so I recommend using an oven mitt.
Bend the acrylic into a U-shape until you are happy with the results. Let it cool to harden.
If you are unhappy with the final results, just re-heat it and try again.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
