Stone Heart Pendent





Introduction: Stone Heart Pendent

This will show you how to take a stone heart and turn it into a pendent.

Don't let the picture fool you, that rock isn't going anywhere.

Step 1: Materials

1. Stone Heart (you can make this usuing my "Stone heart" Instructable)

2. 4" angle grinder

3. Diamond coated sawblade

4. Wire or clothes hanger

Step 2: Making the Groove

You'll need to make a grove all the way around the heart in order to attach it securly to the wire. Just cut it with the grinder (you'll need the grinder to have the diamond sawblade on it).

Step 3: Attaching the Wire

Wrap the wire around the heart several times over, or if your using the hanger just wrap it once.

How I did this was I took a long bit of hanger wire and pressed the middle against the point. Then I twisted the ends together about three times. I made two loops going in the opposite directions, and twisted them down around about twice. Then I just clipped the ends.

Step 4: Form the Loop

Make a loop to attach your pendant to a necklace and your done!!!



    • Paper Contest 2018

      Paper Contest 2018
    • Trash to Treasure

      Trash to Treasure
    • Pocket-Sized Contest

      Pocket-Sized Contest

    We have a be nice policy.
    Please be positive and constructive.




    The wire is too scratched up you gotta be careful with that

    THE MOLLUSK #!. Thanx for the example, especially using the side grinder.
    #2. Do the initials MAV and the term North Murray mean anything to you? I went to school with a girl they called THE MOLLUSK back in the '60s. Go Pokes. AC

    I like it. I see great looking stones all the time and wish I could figure out a way to use it.

    steam and skimmo -- let's see the one YOU made. 

    me either no offence but its kinda gaudy adn ugly

    i wouldn't wear it