Stone tile lamp

Step 2 Assembling the tiles: making the four sides

The lamp is made from a total of eight tiles, two tiles high and one tile wide with four sides.

• The first step is to glue the four sets of two tiles together along their edges. Make sure the sides line up evenly. Allow to dry fully, the glue I used takes 24hrs to cure.
• Once the glue is cured, apply grout along the seam between the two tiles and wipe off any excess.
• Allow the grout to dry before you proceed to the next step.

Comments

[porcupinemamma]

This is beautiful

[vandal1138]

or an old happy sock.... Joking aside this looks great man. Think I'll throw a few together for the house!