Picture of Streamline Dart Mod
This mod adds a little extra distance and power to a dart that you might need to fire. Please read the notes, they have important information in them!!
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials

You will need:
a dart(duh)
a cutting tool
hot glue gun
sharpie(optional(to mark the darts))
(\_/) (read the notes!)
(  '.') /

Step 2: Cut The Dart

Picture of Cut The Dart

Start with the little hole on the side of the dart tip. Get your cutting tool into the hole, then cut down the tip to the other side. Refer to the other pic for the finished step.

Step 3: Fill The Tip

Picture of Fill The Tip
excess (2).JPG
Insert the tip of the hot glue gun and fill the tip with hot glue. Don't be a clean freak, excess over the top is good, so it is filled all the way. Just wipe it off.

Step 4: Done!

Picture of Done!
Just make lots more and have something to shoot! Good Luck!